Gear Motors Group 2: SAE “A”- two holes

Gear Motors Group 2: SAE “A”- two holes

The gear motors construction include a gear housing from extruded in aluminium alloy and mounting flanges and covers made in cast iron material.Thanks to this construction the OT gear motors can be used in heavy working conditions and allow the transmission of high hydraulic powers. Also they offer very good mechanical and volumetric efficiencies, a low noise level and limited weight in comparison with the transmittable power.
Suction and pressures ports can be GAS threated or flanged type. Displacements from 4,10 to 30 cc/rev and working pressures up to 260 bar.
For any information about working conditions, limit performances or dimensions, please see the pdf technical sheet.
For other types of motors ( with front bearing, with maximum pressure relief valve, anticavitation valve, high pressure shaft seal ), please refer to our technical catalogue.


Dana SAC UK (Head Office)

Dana SAC UK Ltd, Kestrel Court, Centre Park, Warrington, Cheshire, WA1 1QX
T: 01925 636682 / E: sales.breviniuk@dana.com

Gearbox Service Centre

Dana SAC UK Ltd, Exmoor Avenue, Skippingdale Ind Estate, Scunthorpe, North Lincs, DN15 8NJ
T: 01724 281868 / E: service.breviniuk@dana.com